To display a summary of the LLDP configuration settings on the device, enter the
show lldp command at any level of the CLI.
The following shows an example report.
device#show lldp
LLDP transmit interval : 10 seconds
LLDP transmit hold multiplier : 4 (transmit TTL: 40 seconds)
LLDP transmit delay : 1 seconds
LLDP SNMP notification interval : 5 seconds
LLDP reinitialize delay : 1 seconds
LLDP-MED fast start repeat count : 3
LLDP maximum neighbors : 392
LLDP maximum neighbors per port : 4
The following table describes the information displayed by the
show lldp statistics command.
|
Field
|
Description
|
|
LLDP transmit interval
|
The number of seconds between regular LLDP packet transmissions.
|
|
LLDP transmit hold multiplier
|
The multiplier used to compute the actual time-to-live (TTL) value of an LLDP advertisement.
The TTL value is the transmit interval multiplied by the transmit hold multiplier.
|
|
LLDP transmit delay
|
The number of seconds the LLDP agent will wait after transmitting an LLDP frame and
before transmitting another LLDP frame.
|
|
LLDP SNMP notification interval
|
The number of seconds between transmission of SNMP LLDP traps (lldpRemTablesChange)
and SNMP LLDP-MED traps (lldpXMedTopologyChangeDetected).
|
|
LLDP reinitialize delay
|
The minimum number of seconds the device will wait from when LLDP is disabled on
a port, until a request to re-enable LLDP on that port will be honored.
|
|
LLDP-MED fast start repeat count
|
The number of seconds between LLDP frame transmissions when an LLDP-MED Endpoint
is newly detected.
|
|
LLDP maximum neighbors
|
The maximum number of LLDP neighbors for which LLDP data will be retained, per device.
|
|
LLDP maximum neighbors per port
|
The maximum number of LLDP neighbors for which LLDP data will be retained, per port.
|