Configuring civic address location

When you configure a media Endpoint location using the address-based location, you specify the location the entry refers to, the country code, and the elements that describe the civic or postal address.

To configure a civic address-based location for LLDP-MED, use the lldp med location-id civic-address command in global configuration mode of the CLI.

device(config)# lldp med location-id civic-address refers-to client country US elem 1 CA elem 3 "San Jose" elem 6 "120 Holger Way" elem 24 95134 elem 27 5 elem 28 551 elem 29 office elem 23 "John Doe"

This example describes the following location elements:

• Country=USA
• State=California
• City=San Jose
• Street address=120 Holger Way
• Post code=95134
• Floor=5
• Cube number=551
• Type of location=Office
• Name at civic address=John Doe

Example civic address location advertisement

The Civic address location advertisement will appear similar to the following on the remote device, and in the CLI display output on the RUCKUS device (show lldp local-info).

+ MED Location ID
    Data Format: Civic Address
    Location of: Client
    Country    : "US"
    CA Type    : 1
    CA Value   : "CA"
    CA Type    : 3
    CA Value   : "San Jose"
    CA Type    : 6
    CA Value   : "120 Holger Way"
    CA Type    : 24
    CA Value   : "95134"
    CA Type    : 27
    CA Value   : "5"
    CA Type    : 28
    CA Value   : "551"
    CA Type    : 29
    CA Value   : "office"
    CA Type    : 23
    CA Value   : "John Doe"