Use the show ntp associations
command to display detailed association information for the NTP server or peers.
device# show ntp associations
address ref clock st when poll reach delay offset disp
*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377
~2001:235::234
INIT 16 - 64 0 0.00 0.000 15937
* synced, # selected, + candidate, - outlayer, x falseticker, ~ configured
The following table provides descriptions of the
show ntp associations command output.
show ntp associations
Command Output
Field
|
Description
|
*
|
The peer has been declared the system peer and lends its variables to the system
variables.
|
#
|
This peer is a survivor in the selection algorithm.
|
+
|
This peer is a candidate in the combine algorithm.
|
-
|
This peer is discarded as outlier in the clustering algorithm.
|
x
|
This peer is discarded as a 'falsticker' in
the selection algorithm.
|
~
|
The server or peer is statically configured.
|
address
|
IPv4 or IPv6 address of the peer.
|
ref clock
|
IPv4 address or first 32 bits of the MD5 hash
of the IPv6 address of the peer to which the clock is synchronized.
|
St
|
Stratum setting for the peer.
|
when
|
Time, in seconds, since last NTP packet was received from peer.
|
poll
|
Polling interval (seconds).
|
reach
|
Peer reachability (bit string, in octal).
|
delay
|
Round-trip delay to the peer, in
milliseconds.
|
offset
|
Relative time difference between a peer clock and a local clock, in milliseconds.
|
disp
|
Dispersion.
|