Creating Static RARP Entries

A Layer 3 switch can send an IP address in reply to a client RARP request only after creating a RARP entry for that client.

Note: The RARP entry number can be any unused number from 1 to the maximum number of RARP entries supported on the device. To determine the maximum number of entries supported on the device, refer to the RUCKUS FastIron Layer 2 Switching Configuration Guide.

Enter the global configuration mode.
```
device# configure terminal
```

Assign a static IP RARP entry for static routes.
```
device(config)# rarp 1 0000.0054.2348 10.53.4.2
```

The following example creates a RARP entry. The Layer 3 switch sends IP address 192.53.4.2 in response to the RARP request from the client with MAC address 0000.0054.2348 having RARP entry number 1.

device# configure terminal
device(config)# rarp 1 0000.0054.2348 10.53.4.2

RUCKUS FastIron Layer 3 Routing Configuration Guide, 08.0.95 53-1005658-16

Creating Static RARP Entries