Campus Fabric Layer 3 Unicast Considerations
Note: When the L3_MAX profile is enabled for the
next hop routing table, SPX cannot be enabled, and vice versa. Refer to the RUCKUS FastIron Layer 3 Routing Configuration Guide for more information
on configuring next-hop routing profiles.
The following table lists Layer 3 unicast features available in a Campus Fabric domain for ICX 7150, ICX 7250, or ICX 7450 devices enabled as PE units. Layer 3 features do not change for devices enabled as CB units.
Layer 3 Unicast Features in a Campus Fabric Domain
| Layer 3 | PE Support | |
|---|---|---|
| Features and capabilities | IPv4 | IPv6 |
| Static Routes | Yes | Yes |
| Host Routes | Yes | Yes |
| Virtual Interfaces | Yes | Yes |
| Routed Interfaces | Yes | Yes |
| Route-only Support | Yes | Yes |
| RIP v1/v2 announce | Yes1 | N/A |
| RIPv1/v2 | Yes 1 | N/A |
| RIPng | N/A | No |
| OSPFv2 | Yes 1 | N/A |
| OSPFv3 | N/A | Yes1 |
| ECMP | Yes2 | Yes2 |
| VRRP | Yes | N/A |
| VRRPv3 | No | Yes |
| VRRP-E | Yes | Yes |
| VRRP-E SPF | Yes | Yes |
| IPv6 over IPv4 Tunnels | N/A | No3 |
| Multi-VRF | Yes | Yes |
| IPv4 over GRE-IPv4 Tunnels | Yes1 | N/A |
| BGP | Yes1 | N/A |
| BGP4+ | Yes1 | Yes1 |