internal-dp-group

Enables and sets the data plane grouping.
Syntax
internal-dp-group{ dp-mac-group|<dp1-mac>|<dp2-mac>|<dp2-mac>}
no internal-dp-group
Command Default

No internal data plane groups are created.

Parameters
dp-mac-group
Internal Data Plane Groups (comma separated DP MAC addresses in a group, space separated groups). Ex: 3 DP, value can be like "<dp1-mac>, <dp2-mac>, <dp3-mac>"
Modes

Global configuration mode

Usage Guidelines

The data planes across the node in a cluster can be grouped and an AP in the node can be tunneled to the group of data planes. Data plane groups are comma separated DP MAC addresses in a group. For example, 3 DP value is seen as “<dp1-mac>,<dp2-mac><dp3-mac>.”

The no form of this command removes the internal data plane groups.

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example displays internal-dp-group configuration. 

device# config
device(config)# internal-dp-group
  <dp-mac-group>     Internal Data Plane Groups (comma separated DP MAC addresses in a group, 
space separated groups). Ex: 3 DP, value can be like "<dp1-mac>,<dp2-mac> <dp3-mac>"

device(config)# dp-mac-group dp1-172.19.7.100,dp2-172.19.8.120, dp3-172.19.9.130
History
Release version Command history
6.0.0 This command was introduced.
Parent topic: Commands G through I