cluster-ipsec recovery

Resets the IPsec service to a stable operational state.

Syntax

cluster-ipsec
                  recovery

Command Default

Before executing this cluster-ipsec recovery command, the operational IPsec service may be experiencing configuration sync issues, connection drops, and preventing the system from establishing new connections.

Parameters

cluster-ipsec recovery: Restarts the service, reloads the configuration or attempt to re-establish active connections.

Modes

Global Configuration Mode

Usage Guidelines

This command is supported on SmartZone controllers with FIPS mode enabled.

Examples

The following example displays the cluster-ipsec recovery command.

device(config)# cluster-ipsec recovery 
Please input self node cluster IP address: 10.206.84.130
Please input other node's cluster IP address. Use a comma (,) to separate IP address (example: ipAddr1,ipAddr2): 10.206.84.101
Successful operation

History

Release version	Command history
7.1.1.3	This command was introduced.

RUCKUS SmartZone (LT-GA) Command Reference Guide, 7.1.0 800-73617-001 Rev A

cluster-ipsec recovery