Enters Bridge Profile configuration mode to configure bridge forwarding profiles.
Syntax
After the
bridge-profile command is entered to enable the Bridge Profile configuration mode, the following
configuration syntax is available:
[descriptiontext|dhcp-option-82|dhcp-relay|dhcp-server1ip-address|dhcp-server2ip-address|namename|relay-both]After the
dhcp-option-82 command is entered to enable the Bridge Profile DHCP Option82 configuration mode,
the following configuration syntax is available:
[subopt1{ap-essid|ap-info-default|ap-info-location|ap-mac|format}|subopt150|subopt151{area-namename|essid}|subopt2{ap-essid|ap-mac|ue-essid|ue-mac|format}]
Command Default
The bridge forwarding profile is not configured.
Parameters
- name
- Specifies the bridge profile name
- descriptiontext
- Sets the description of the bridge profile.
- dhcp-option82
- Enables DHCP option 82.
- dhcp-relay
- Enables DHCP relay.
- dhcp-server1ip-address
- Sets the DHCP server 1.
- dhcp-server2ip-address
- Sets the DHCP server 2.
- namename
- Sets the bridge profile name.
- relay-both
- Enables DHCP to send requests to both servers simultaneously.
- subopt1
- Specifies sub-option 1.
- ap-essid
- Specifies the ESSID of the AP.
- ap-info-default
- Specifies the default information for the AP.
- ap-info-location
- Specifies the AP location.
- ap-mac
- Specifies the MAC address of the AP.
- subopt150
- Specifies sub-option 150.
- subopt151
- Specifies sub-option 151.
- area-namename
- Specifies the area.
- essid
- Specifies the ESSID.
- subopt2
- Specifies sub-option 2.
- ue-essid
- Specifies the ESSID of the client.
- ue-mac
- Specifies the MAC address of the client..
Modes
Global configuration mode
Usage Guidelines
This command is supported on the SmartZone 300 and vSZ-H controllers only.
The
dhcp-option82,
dhcp-server1ip-address,
dhcp-server2ip-address, and
relay-both options are only available after DHCP relay has been enabled.
The
no form of the command deletes the configured bridge profile.
Examples
The following example creates a bridge profile “auth-prof” and enters Bridge Profile
configuration mode.
device# config
device(config)# bridge-profile auth-prof
device(config-bridge-profile)#
The following example removes the bridge profile “auth-prof”.
device# config
device(config)# no bridge-profile auth-prof