ap-model

Specifies the AP model to be used.
Syntax
ap-model ap-model-name

After the ap-model command has been entered to enter AP Model configuration mode, the following configuration syntax is available (syntax in groupings for clarity):

[ ext-ant { 2.4g num | 2.4gg num [ 2 | 3 ] | 5g num | 5gg num [ 2 | 3 ] ]
[ internal-heater | lan | led | led-mode | lldp | lldp-ad-interval seconds | lldp-hold-time seconds | lldp-mgmt | poe-operating-mode poe-value | poe-out-port | radio-band radio-value | ]
[ { usb | usb-software } ap-model [ enable | disable ]
Command Default

No AP model is specified.

Parameters
ap-model-name
Specifies the AP model name.
ext-ant
Specifies the external antenna wireless frequency.
2.4g num
Enables the external 2.4 GHz antenna on the selected AP model and sets the gain number as a number between 0 and 90dBi.
2.4gg num 2 3
Enables the external 2.4 GHz antenna on the selected AP model, sets the gain number, and .
5g num
Enables the external 5 GHz antenna on the selected AP model and sets the gain number as a number between 0 and 90dBi.
5gg num 2 3
Enables the external 5 GHz antenna on the selected AP model, sets the gain number, and sets the.
internal-heater
Enables the heater that is built into the AP model.
led
Specifies Hotspot 2.0 as the authentication method.
led-mode
Specifies Hotspot 2.0 Secure Onboarding (OSEN) as the authentication method.
web-authentication
Specifies Web authentication as the authentication method.
wechat
Specifies WeChat as the authentication method.
Modes

IPSec Profile configuration mode

WLAN Zone configuration mode

Usage Guidelines

This command is available only after one of the following commands is entered:

  • ipsec-profile

  • wlan

Examples

The following example creates a WLAN in zone Zone10, and sets the authentication type yo be guest access. 

device# config
device(config)# zone zone10
device(config-zone)# wlan wlan20
device(config-zone-wlan)# auth-type guest-access
Parent topic: Commands A through C