cluster-ipsec conn
Displays IPSec (Internet Protocol
Security) connection.
Command Default
The pre-defined IPsec connection profiles will not be active.
Parameters
Modes
Global Configuration Mode
Usage Guidelines
This command is supported on SmartZone controllers with FIPS mode enabled.
Examples
This following example displays the current cluster IPsec connection.
device(config)# cluster-ipsec conn List current cluster ipsec connection disable Disable ipsec recovery Apply ipsec config and cluster ACL device(config)# cluster-ipsec conn cluster-nodeθ: #2, ESTABLISHED, IKEv2,e4d04f69a3b88c16_i* 24bffe137b4925a0_r local 'C=US, ST=CA, L=Sunnyvale, 0=Ruckus Wireless Inc., E=service@ruckuswireless.com,CN=ipsec.scg.ruckuswireless.com' @ 10.206.84.86[500] remote 'C=US, ST=CA, L=Sunnyvale, 0=Ruckus Wireless Inc., E=service@ruckuswireless.com, CN=ipsec.scg.ruckuswireless.com' @ 10.206.84.16[500] AES GCM 16-256/PRF HMAC SHA2 512/ECP 384 established 44s ago, rekeying in 84029s cluster: #3, reqid 2, INSTALLED, TRANSPORT, ESP:AES_GCM_16-256 installed 46s ago, rekeying in 38858s, expires in 47477s in cc01001e, 15352 bytes, 120 packets, Os ago out c733675c, 17203 bytes, 117 packets, 10s ago local 10.206.84.86/32 remote 10.206.84.16/32"
History
| Release version | Command history |
|---|---|
| 7.1.1.3 | This command was introduced. |