Onboarding, Authentication and Authorization for RUCKUS One

The RUCKUS Edge onboarding flow encompasses the steps required to integrate and configure RUCKUS devices within a network. This process ensures seamless connectivity and optimal performance by guiding users through setup, configuration, and validation stages.

Onboarding flow includes:

  1. Configure network connectivity using DHCP (default) or a static IP address on the Edge device.
  2. If using a static IP address, configure the gateway and DNS server settings.
  3. Verifying connectivity.
  4. Onboarding RUCKUS Edge to RUCKUS One.

    Note:
  • Management: RUCKUS Edge can only be managed by RUCKUS One. Configurations from RUCKUS One are stored in persistent memory and survive reboots.
  • Default Behavior: Before onboarding RUCKUS One, Edge runs DHCP client on all interfaces. Recommended to keep only one interface UP to use a single DHCP IP for connectivity with RUCKUS One.
  • Static IP Option: For deployments requiring static IP, Edge provides basic network CLI commands (IP, subnet mask, gateway, DNS) to enable connectivity to RUCKUS One.
  • Temporary Config: CLI-based network settings are not persistent and will be lost after reboot.
  • Post-Onboarding: Once Edge connects to RUCKUS One, admin should configure ports via RUCKUS One so that settings are saved in persistent memory.

CLI Command Summary

Task Command
Assign Static IP set interface ip address interface ip | mask gateway
Create LAG create lag id
Add Ports to LAG lag add id member-port
Assign IP to LAG set interface ip address lag0 ip | mask gateway
Configure DNS set dns server ipv4-address
Verify Interface IP show interface address
Verify DNS show dns server

Onboarding a RUCKUS Virtual Edge device with RUCKUS One is a two-step process:
  1. Add the RUCKUS Virtual Edge to RUCKUS One as per your platform preference:
  2. Authorize and authenticate the RUCKUS Virtual Edge device using a one-time password - Refer to Authenticating the RUCKUS Virtual Edge Using the OTP for detailed instructions.