Configuring and Verifying RUCKUS Virtual Edge
on RUCKUS One
After the RUCKUS Virtual Edge device is
onboarded successfully, the device is displayed on RUCKUS One with the status as
Needs port config. You must configure the interfaces to change
the status of the device to Operational.
After the RUCKUS Edge device is onboarded on
the RUCKUS One
management platform, the status of the RUCKUS Edge and ports is displayed
as Needs port config and Unconfigured port type,
respectively.
Manual DNS server configurations are
supported at the device level. The DNS server, when configured manually, overrides
the
server list received from the DHCP option.