Configuring NTP on the ESXi Server

Before deploying a RUCKUS Virtual Edge device, as a prerequisite you must configure Network Time Protocol (NTP) to synchronize the time of the ESXi server with the external NTP server.
Complete the following steps to configure NTP on the ESXi server.
  1. Log in to the ESXi server.
  2. Select Host > Manage.
  3. Under the System tab, select Time & date and click Edit NTP Settings.
    This displays the Edit NTP Settings window.

    Configuring NTP Settings on the ESXi Server

  4. In the Edit NTP Settings window, select the Use Network Time Protocol (enable NTP client) option.

    Editing NTP Settings

  5. For NTP service startup policy, select Start and stop with host from the list.
  6. For NTP servers, enter the IPv4 or IPv6 address for one or more NTP servers.
  7. Click Save.