- show
Displays the system
information.
- show arpterm config
Displays the active configuration
currently in use for ARP termination.
- show arpterm neighbor
Displays the list of IPv4 or IPv6
neighbors learned and added to the ARP Termination table, with the most recently added
neighbor listed first.
- show arpterm neighbors
Displays the list of both IPv4 and IPv6
neighbors learned and added to the ARP Termination table, with the most recently added
neighbor listed first.
- show arpterm neighbor-sorted
Displays the list of IPv4 or IPv6
neighbors learned and added to the ARP Termination table, in the sequence they were
added to
the table.
show
(cluster)Displays information about the cluster
status and logs.
show
config-result-historyDisplays the configuration history for
each applied GPB.
show default gatewayDisplays the default gateway of the ip
route address.
show dns serverDisplays all the DNS servers.
show
(featureflag)Displays information about feature flags.
- show ftm
Displays the current internal state of the
Flow Table Manager (FTM), including active interfaces and session information.
Useful for troubleshooting and debugging the dual-WAN module behavior.
- show gkm tunnel keepalive session
Displays the GRE Keepalive Module
status.
show
gpb-decode-allDisplays the decode of all GPB (Google
Protocol Buffers) messages applied during configuration.
- show gre-tunnel
Displays the basic GRE Tunnel
configuration details along with the associated WLANs.
- show hqos bw_profile
Displays detailed information about the
Hierarchical Quality of Service (HQoS) bandwidth profiles configured on the RUCKUS
Edge
device.
- show hqos interface <
port-name >
Displays information about the
Hierarchical Quality of Service (HQoS) interface. The command is used for debug
purposes.
- show hqos queue <
port-name >
Displays detailed information about queue
statistics for the given port.
show interface addressDisplays the interface address.
show internal-networkDisplays internal network settings.
- show lacp
Displays LACP configuration details and
status.
- show lag
Displays the status and configuration
details of Link Aggregation Groups (LAGs) in the system.
- show link-monitor status
Helps verify link availability,
performance metrics, ans current state (Up/Down) for monitoring network health.
show logsDisplays logs of specific pods.
show log levelDisplays log level for all class.
show
log-levelDisplays the currently configured log
level for the pods.
show
log-streamingDisplays the current log-streaming status.
- show manager status
Displays information on the network
manager application.
- show mdns-gw config
Displays mDNS gateway configuration,
including the forwarding rules for various mDNS services.
- show mdns-gw services
Displays the list of mDNS services
discovered based on the mDNS domain string matched against the domain name string
in the
mDNS response packet, along with the MAC address, VLAN, and interface from which the
packet
was received.
- show mdns-gw service-table
Displays the list of configured
forwarding rules using the mDNS domain strings instead of service types.
- show mdns-gw service-types
Displays the list of predefined mDNS
gateway service types and the corresponding domain name strings. This is useful for
debugging to identify which domain name string is used to classify mDNS response packets
according to the configured mDNS proxy service forwarding rules.
- show multi-wan policy
Displaysthe configuration details and
status of the Multi-WAN Policy on the RUCKUS Edge device.
- show nat44 address pool
Displays the list of IP addresses used for NAT44, along with
their associated tenant VRF and outbound interface details. This information helps
in
understanding the NAT configuration for each address.
- show peer-tunnel
This command displays the configuration
of peer-tunnel and fallback setting. The peer tunnel is used to send guest WLAN traffic
between Data Center RUCKUS Edge and DMZ RUCKUS Edge.
- show peer-tunnel-ka
This command displays the status of the
peer-tunnel keepalive.
show
pin-infoDisplays PIN information of the RUCKUS
Edge device.
show pin-panDisplays security policies in Personal
Area Network (PAN).
show podsDisplays the list of running pods.
show portDisplays port details of the
sub-interface.
- show resource-config
Displays the current resource
allocation.
- show route
Displays the vector packet processor (VPP)
routing information.
show sdlan configDisplays SD-LAN configuration details.
- show sdlan counters
Displays the SD-LAN related counters
information. Use it check SDLAN related failures.
- show sdlan info
Displays the current VLANs which are
serviced by the SD-LAN.
- show sdlan mac
Displays the SD-LAN MAC details.
- show sdlan peer
Displays the sdlan information for an AP
or peer Edge.
- show sdlan summary
Displays a summary of information for the
SD-LAN.
- show sdlan wlan
Displays the dynamic mapping between
WLANs and VLANs.
- show serial
Displays the serial number of your
RUCKUS Edge device.
show statusDisplays the current status of the
configuration.
show statusDisplays the current onboarding status of
the RUCKUS Edge device.
show tunnel-mgrDisplays detailed information about active
tunnels managed by the RUCKUS Edge device.
show tunnel profileDisplays the tunnel profile information.
show versionDisplays the vector packet processing
(VPP) version.
show vxlan configDisplays Virtual Extensible LAN (VxLAN)
configuration details.
show vxlan dstatsDisplays dynamic status for Virtual
Extensible LAN (VxLAN) on the RUCKUS Edge device.
show vxlan pmtu tableDisplays the Maximum Transmission Unit
(MTU) updates for the VxLAN received from APs for the RUCKUS Edge device.
- show vxlan tunnel
Displays the VxLAN tunnel
information.
show vxlan tunnel profileDisplays the Virtual Extensible LAN
(VxLAN) tunnel profile information.
show vxlan-gpe configDisplays Generic Protocol Extension for
Virtual Extensible LAN (VxLAN-GPE) configuration details.
show vxlan-gpe dstatsDisplays dynamic tunnel statistics for the
Generic Protocol Extension for Virtual Extensible LAN (VxLAN-GPE) tunnels on the RUCKUS
Edge
device.
show vxlan-gpe pmtu
tableDisplays the Generic Protocol Extension
for Virtual Extensible LAN (VxLAN-GPE) PMTU updates received from APs for the RUCKUS
Edge
device.
show vxlan-gpe tunnelDisplays the Generic Protocol Extension
for Virtual Extensible LAN (VxLAN-GPE) tunnel information for the RUCKUS Edge
device.
show vxlan-gpe tunnel keepalive
sessionDisplays Generic Protocol Extension for
Virtual Extensible LAN (VxLAN-GPE) tunnel keepalive session information.