show port

Displays port details of the sub-interface.
Syntax
show port[ subinterface_name]
Modes

Network mode

The show port command displays the following information.

Output field Description
Name Displays the port name.
tag Displays the port tag.
Idx Index value of the port.
State Displays the operational status of the port.
MTU (L3/IP4/IP6/MPLS) Displays the maximum transmission unit for Layer 3, IPv4, IPv6, and MPLS.
Counter Displays the counter type.
Count Shows the number of counters
Examples

The following example displays the port information.

network# show port
          Name                     tag           Idx    State  MTU (L3/IP4/IP6/MPLS)     Counter          Count     
port1                             none            1      up          1500/0/0/0     rx packets                343338
                                                                                    rx bytes                55784005
                                                                                    tx packets                 94438
                                                                                    tx bytes                10541902
                                                                                    drops                     251910
                                                                                    punt                         724
                                                                                    ip4                       204016
                                                                                    ip6                        60720
History
Release version Command history
2.4.0 This command was introduced.