show vxlan-gpe tunnel keepalive
session
show vxlan-gpe tunnel keepalive
session
[
peer
peer-ip[
peer-tid peer-tunnel-id
][
peer-sn peer-serial-number
]
[
detail
|
summary
]Advanced mode. - Network
The show vxlan-gpe tunnel keepalive
session [peer <peer-ip>][peer-tid <peer-tunnel-id>][peer-sn
<peer-serial-number>][summary|detail] command displays the
following information.
This command is supported only on the RUCKUS Edge device. The AP uses the tunnel keepalive messages to bring up the tunnel to the device and to monitor the health of the tunnel. Without the keep-alive feature, if the Edge device becomes unreachable, the AP will continue tunneling traffic to the Edge, causing the traffic to be lost in the network. With the keep-alive feature enabled, the AP will generate events, bring down the tunnel, and stop broadcasting WLANs whenever the Edge device is unreachable. Additionally, the AP will periodically report its tunnel status to the RUCKUS One controller. These details will assist in troubleshooting.
The following example displays the tunnel keepalive session information.
vpp# show vxlan-gpe tunnel keepalive session # Peer IP Start time Status Active/Backup 1 192.168.31.3 2024-09-26 17:37:05 Up Backup 2 192.168.30.4 2024-09-26 22:40:27 Up Active 3 192.168.31.4 2024-09-26 22:40:33 Up Backup 4 192.168.31.7 2024-09-26 23:29:35 Up Active 5 192.168.10.14 2024-09-26 22:40:36 Up Backup
The following example displays the tunnel keepalive session information for a specific peer.
vpp# show vxlan-gpe tunnel keepalive session peer 192.168.31.3 # Peer IP Start time Status Active/Backup 1 192.168.31.3 2024-09-26 17:37:05 Up Backup
The following example displays the detailed tunnel keepalive session information for a specific peer in Responder mode.
vpp# show vxlan-gpe tunnel keepalive session peer 192.168.31.3 detail Peer IP address : 192.168.31.3 Mode : Responder Session state: Up (Backup) Start time: 2024-09-26 17:37:05 Last PDU received : 1.68 seconds ago Last PDU transmit : 1.68 seconds ago Age remaining : 5 seconds Keepalive Request Packets Sent: 0 Received: 22611 Keepalive Reply Packets Sent:22611 Received: 0 Keepalive Connection Packets Sent: 0 Received: 1 Keepalive BackUp Packets Sent: 0 Received: 18245
The following example displays the detailed tunnel keepalive session information.
vpp# show vxlan-gpe tunnel keepalive session detail Peer IP address : 168.56.1.2 (tid:1 NAT port:4790) Initiator tid : 1 Peer Device SN : 3923395001100000000000000000000000 Mode : Responder Session state: Up (Active) Start time: 2025-02-03 10:23:42 Last PDU received : 1.17 seconds ago Last PDU transmit : 1.17 seconds ago Age remaining : 9 seconds Keepalive Request Packets Sent: 0 Received: 4531 Keepalive Reply Packets Sent: 4531 Received: 0 Keepalive Connection Packets Sent: 0 Received: 2 Keepalive BackUp Packets Sent: 0 Received: 0
The following example displays the detailed tunnel keepalive session information for a specific peer in Initiator mode.
show vxlan-gpe tunnel keepalive session peer 2.1.1.1 detail Peer IP address : 2.1.1.1 Mode : Initiator Interval: 2 Retry: 5 Session state: Up (Active) Start time: 2024-08-14 05:50:23 Last PDU received : .89 seconds ago Last PDU transmit : .89 seconds ago Age remaining : 9 seconds Keepalive Request Packets Sent: 142 Received: 0 Keepalive Reply Packets Sent: 0 Received: 140 Keepalive Connection Packets Sent: 3 Received: 0 Keepalive BackUp Packets Sent: 0 Received: 0
The following example displays the peer-tid filter in the tunnel keepalive session
DBGvpp# show vxlan-gpe tunnel keepalive session peer-tid 1 # Peer IP Start time Status Active/Backup 1 172.20.20.30 (tid: 1 NAT port: 4790) 2025-06-24 19:59:25 Up Active 2 172.20.20.14 (tid: 3 NAT port: 0 ) 2025-06-25 18:21:08 Up Active 3 172.20.20.24 (tid: 2 NAT port: 4790) 2025-06-25 18:20:55 Up Active DBGvpp# DBGvpp# DBGvpp# show vxlan-gpe tunnel keepalive session peer-tid 1 detail Peer IP address : 172.20.20.30 (Peer tid:1 NAT port:4790) Local tid : 1 Peer Device SN : 1323790041390000000000000000000000 Mode : Responder Session state: Up (Active) Start time: 2025-06-24 19:59:25 Last PDU received : .98 seconds ago Last PDU transmit : .98 seconds ago Age remaining : 5 seconds Keepalive Request Packets Sent: 0 Received: 43147 Keepalive Reply Packets Sent:43147 Received: 0 Keepalive Connection Packets Sent: 0 Received: 1 Keepalive BackUp Packets Sent: 0 Received: 0
The following example displays the peer-sn filter in the tunnel keepalive session
DBGvpp# show vxlan-gpe tunnel keepalive session peer-sn 1323790041390000000000000000000000 # Peer IP Start time Status Active/Backup 1 172.20.20.30 (tid: 1 NAT port: 4790) 2025-06-24 19:59:25 Up Active DBGvpp# DBGvpp# DBGvpp# show vxlan-gpe tunnel keepalive session peer-sn 1323790041390000000000000000000000 detail Peer IP address : 172.20.20.30 (Peer tid:1 NAT port:4790) Local tid : 1 Peer Device SN : 1323790041390000000000000000000000 Mode : Responder Session state: Up (Active) Start time: 2025-06-24 19:59:25 Last PDU received : 2.15 seconds ago Last PDU transmit : 2.15 seconds ago Age remaining : 6 seconds Keepalive Request Packets Sent: 0 Received: 43200 Keepalive Reply Packets Sent:43200 Received: 0 Keepalive Connection Packets Sent: 0 Received: 1 Keepalive BackUp Packets Sent: 0 Received: 0 DBGvpp#
| Release version | Command history |
|---|---|
| 2.4.0 | Output supporting NAT-T. |
| 2.1.0 | This command was introduced. |