show tunnel-mgr
Advanced mode. - Network
The show tunnel-mgr command
displays the following information.
| Output field | Description
Output
field description required
|
|---|---|
| Tunnel-Id | Displays the local tunnel ID. |
| Peer SerialId | Displays the serial number of the peer device in the tunnel. |
| peertunnelid | Displays the tunnel ID of the peer device. |
| rmt | |
| nat true rmt_port | |
| lcl | |
| lcl_port | |
| vni | |
| tunnel_id | |
| peer_tunnel_id | |
| nat_flag true remote_nat_port | |
| fib-idx | |
| sw-if-idx | |
| user | |
| pmtu-user-type | |
| pmtu-user-inst | |
| pmtu | |
| ff no decap-next-protocol |
This command is supported only on the RUCKUS Edge device. The output includes tunnel IDs, peer serial IDs, local and remote IP addresses and ports, NAT status, VNI, PMTU configuration, and protocol type. This information is useful for debugging and verifying tunnel state and configuration on the RUCKUS Edge device.
The following example displays the information managed by the Tunnel Manager, including the Edge device tunnel ID, the serial number of the peer device, the peer AP tunnel ID, local and remote IP addresses, NAT flag status, and UDP remote port number.
vpp# show tunnel-mgr Tunnel-Id: 1 Peer SerialId: 3923395001100000000000000000000000 peertunnelid 1 lcl 168.56.2.16 rmt 168.56.1.2 nat true rmt_port 4790 [0] lcl 168.56.2.16 rmt 168.56.1.2 lcl_port 4790 rmt_port 4790 vni 16777215 tunnel_id 1 peer_tunnel_id 1 nat_flag true remote_nat_port 4790 fib-idx 0 sw-if-idx 6 user 2 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 ff no decap-next-protocol rshim-ka [1] lcl 168.56.2.16 rmt 168.56.1.2 lcl_port 4790 rmt_port 4790 vni 1002 tunnel_id 1 peer_tunnel_id 1 nat_flag true remote_nat_port 4790 fib-idx 0 sw-if-idx 7 user 1 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 ff no decap-next-protocol ethernet
| Release version | Command history |
|---|---|
| 2.4.0 | This command was introduced. |