show arpterm neighbors
Displays the list of both IPv4 and IPv6
neighbors learned and added to the ARP Termination table, with the most recently added
neighbor listed first.
Command Default
No command default.
Parameters
Modes
Network mode
The show arpterm neighbors
command displays the following information.
Usage Guidelines
This command is supported only on the RUCKUS Edge device.
Examples
The following example displays the ARP
Termination IP/MAC bindings for learned IPv4 and IPv6 neighbors. It includes the IP
and MAC addresses, the registration time, the remaining time-to-live (TTL), the
flags indicating the state or generation method of the binding, and the bridge
domain (BD) where the binding is learned. The Flags Legend explains the flags.
Dynamically learned from ARP Request (DQ) and Dynamically learned from ARP Reply
(DR) denote dynamically learned bindings from ARP Request and Reply,
respectively.
Edge# network
Network# show arpterm neighbors
Timestamp TTL(secs) IP Flags Ethernet BD
01/16/2025 11:55:53 PM 570.1131 192.168.50.1 DR 08:35:71:11:d9:8d 50
01/16/2025 11:55:53 PM 570.1129 192.168.50.6 DQ 68:3e:26:6c:c9:6a 50
01/16/2025 11:55:54 PM 571.0995 fe80::82e1:6069:3289:4346 DQ 68:3e:26:6c:c9:6a 50
01/16/2025 11:55:54 PM 571.4953 192.168.50.3 DQ ac:67:5d:ee:50:70 50
01/16/2025 11:55:55 PM 572.2430 fe80::7b25:462f:2c6d:a5bc DQ ac:67:5d:ee:50:70 50
Flags legend:
S = static
D = dynamic
P = pending
A = stale
Q = request snooping
R = reply snooping
History
| Release version | Command history |
|---|---|
| 2.3.0 | This command was introduced. |