show nat44 address pool

Need description of this command
Displays the list of IP addresses used for NAT44, along with their associated tenant VRF and outbound interface details. This information helps in understanding the NAT configuration for each address.
Syntax
show nat44 address pool
Command Default

No command default.

Modes

Network mode

The show nat44 address pool command displays the following information.

Output field Description
Need description
NAT44 pool addresses NAT IP addresses.
tenant VRF Indicates the Virtual Routing and Forwarding (VRF) instance associated with the tenant.
outbound interface Specifies the transmit interface associated with the NAT address.
Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples
Network# show nat44 address pool
NAT44 pool addresses:
122.100.200.6
  tenant VRF: 0
  outbound interface: port1
122.100.200.7
  tenant VRF: 0
  outbound interface: port1
122.100.200.8
  tenant VRF: 0
  outbound interface: port1
122.100.200.9
  tenant VRF: 0
  outbound interface: port1
122.100.200.10
  tenant VRF: 0
  outbound interface: port1
122.100.200.1
  tenant VRF: 0
  outbound interface: port1
122.100.200.2
  tenant VRF: 0
  outbound interface: port1
122.100.200.3
  tenant VRF: 0
  outbound interface: port1
122.100.200.4
  tenant VRF: 0
  outbound interface: port1
122.100.200.5
  tenant VRF: 0
  outbound interface: port1
History
Release version Command history
2.4.0 This command was introduced.