show hqos bw_profile
Displays detailed information about the
Hierarchical Quality of Service (HQoS) bandwidth profiles configured on the RUCKUS
Edge
device.
Command Default
No command default.
Modes
Network mode
The show hqos bw_profile
commands displays the following information.
| Output field | Description |
|---|---|
| HQOS-QID | Displays the internal queue ID. |
| AC | Displays the access category in IEEE 802.11e. |
| Priority | Displays the priority of access category in IEEE 802.11e. |
| Class Name | Displays the access category names in IEEE 802.11e. |
| Max Rate | Displays the shaper rate. |
| Min Rate | Displays the minimum bandwidth guarantee. |
| is_LLQ | Displays if the queue is a low latency queue. |
Usage Guidelines
This command is supported only on the RUCKUS Edge device.
Examples
Edge# network
Network# show hqos bw_profile
***** The active HQOS BW profile id is 1 *****
Default HQOS BW profile id 0:
HQOS-QID AC Priority Class Name Max Rate Min Rate is_LLQ
0 0 0 background low 100 1 0
1 1 0 best effort low 100 5 0
2 2 0 video low 100 5 0
3 3 0 voice low 100 5 0
4 0 1 background high 100 10 0
5 1 1 best effort high 100 20 0
6 2 1 video high 100 25 1
7 3 1 voice high 100 15 1
Configured HQOS BW profile id 1:
HQOS-QID AC Priority Class Name Max Rate Min Rate is_LLQ
0 0 0 background low 100 1 0
1 1 0 best effort low 100 1 0
2 2 0 video low 100 20 0
3 3 0 voice low 100 20 0
4 0 1 background high 100 5 0
5 1 1 best effort high 100 5 0
6 2 1 video high 50 20 0
7 3 1 voice high 100 20 0
History
| Release version | Command history |
|---|---|
| 2.3.0 | This command was introduced. |