show arpterm neighbor-sorted
Displays the list of IPv4 or IPv6
neighbors learned and added to the ARP Termination table, in the sequence they were
added to
the table.
Command Default
No command default.
Parameters
Modes
Network mode
The show arpterm ipv4
neighbor-sorted and show arpterm ipv6
neighbor-sorted commands displays the following information.
Usage Guidelines
This command is supported only on the RUCKUS Edge device.
Examples
The following example displays the ARP
Termination IP/MAC bindings for learned IPv4/Ipv6 neighbors only. It includes the
IP
and MAC addresses, the registration time (sorted), the remaining time-to-live (TTL),
the flags indicating the state or generation method of the binding, and the bridge
domain (BD) where the binding is learned. The Flag Legend explains the flags.
Dynamically learned from ARP Request (DQ) and Dynamically learned from ARP Reply
(DR) denote dynamically learned bindings from ARP Request and Reply,
respectively.
Edge# network
Network# show arpterm ipv4 neighbor-sorted
Timestamp TTL(secs) IP Flags Ethernet BD
01/16/2025 11:55:53 PM 497.5369 192.168.50.6 DQ 68:3e:26:6c:c9:6a 50
01/16/2025 11:55:53 PM 497.5369 192.168.50.1 DR 08:35:71:11:d9:8d 50
01/16/2025 11:55:54 PM 498.9192 192.168.50.3 DQ ac:67:5d:ee:50:70 50
Flags legend:
S = static
D = dynamic
P = pending
A = stale
Q = request snooping
R = reply snoopingEdge# network
Network# show arpterm ipv6 neighbor-sorted
Timestamp TTL(secs) IP Flags Ethernet BD
01/16/2025 11:55:54 PM 478.6387 fe80::82e1:6069:3289:4346 DQ 68:3e:26:6c:c9:6a 50
01/16/2025 11:55:55 PM 479.7822 fe80::7b25:462f:2c6d:a5bc DQ ac:67:5d:ee:50:70 50
Flags legend:
S = static
D = dynamic
P = pending
A = stale
Q = request snooping
R = reply snooping
History
| Release version | Command history |
|---|---|
| 2.3.0 | This command was introduced. |