show arpterm neighbor
No command default.
Network mode
The show arpterm ipv4
neighbor and show arpterm ipv6 neighbor commands
displays the following information.
This command is supported only on the RUCKUS Edge device.
The following example displays the ARP Termination IP/MAC bindings for learned IPv4/IPv6 neighbors only. It includes the IP and MAC addresses, the registration time, the remaining time-to-live (TTL), the flags indicating the state or generation method of the binding, and the bridge domain (BD) where the binding is learned. The Flag Legend explains the flags. Dynamically learned from ARP Request (DQ) and Dynamically learned from ARP Reply (DR) denote dynamically learned bindings from ARP Request and Reply, respectively.
Edge# network
Network# show arpterm ipv4 neighbors
Timestamp TTL(secs) IP Flags Ethernet BD
01/16/2025 11:55:54 PM 507.5772 192.168.50.3 DQ ac:67:5d:ee:50:70 50
01/16/2025 11:55:53 PM 506.1948 192.168.50.1 DR 08:35:71:11:d9:8d 50
01/16/2025 11:55:53 PM 506.1948 192.168.50.6 DQ 68:3e:26:6c:c9:6a 50
Flags legend:
S = static
D = dynamic
P = pending
A = stale
Q = request snooping
R = reply snooping
Edge# network
Network# show arpterm ipv6 neighbor
Timestamp TTL(secs) IP Flags Ethernet BD
01/16/2025 11:55:55 PM 485.9289 fe80::7b25:462f:2c6d:a5bc DQ ac:67:5d:ee:50:70 50
01/16/2025 11:55:54 PM 484.7853 fe80::82e1:6069:3289:4346 DQ 68:3e:26:6c:c9:6a 50
Flags legend:
S = static
D = dynamic
P = pending
A = stale
Q = request snooping
R = reply snooping
| Release version | Command history |
|---|---|
| 2.3.0 | This command was introduced. |