`auth auth-mode`

Configures Flexible authentication mode at the interface level.

Syntax

auth auth-mode { multiple-hosts | multiple-untagged | single-host | single-untagged }

no auth auth-mode { multiple-hosts | multiple-untagged | single-host | single-untagged }

Command Default

The default Flexible authentication mode at the interface level is single-untagged.

Parameters

multiple-hosts: Configures the interface to operate in multiple-host authentication mode.
multiple-untagged: Configures the interface to operate in multiple-untagged authentication mode.
single-host: Configures the interface to operate in single-host authentication mode.
single-untagged: Configures the interface to operate in single-untagged authentication mode.

Modes

Interface configuration mode

Usage Guidelines

The auth auth-mode configuration on a port overrides the global auth-mode configuration for the device.

The no form of the command returns the interface to the default authentication mode.

Examples

The following example configures the Flexible authentication mode on port 1/1/1 as multiple-hosts.

device# configure terminal
device(config)# interface ethernet 1/1/1
device(config-if-e10000-1/1/1)# auth auth-mode multiple-hosts

History

Release version	Command history
08.0.80	This command was introduced.

auth auth-mode