aaa accounting exec

Configures the AAA accounting configuration parameters for SSH and Telnet access.
Syntax
aaa accounting exec default start-stop radius [ tacacs+ ] [ none ]
no aaa accounting exec default start-stop radius [ tacacs+ ] [ none ]
aaa accounting exec default start-stop tacacs+ [ radius ] [ none ]
no aaa accounting exec default start-stop tacacs+ [ radius ] [ none ]
aaa accounting exec default start-stop none
no aaa accounting exec default start-stop none
Command Default

AAA accounting is disabled.

Parameters
default
Configures the default named list.
start-stop
Configures to send an Accounting Start packet to the AAA accounting server when an authenticated user establishes a Telnet or SSH session on the ICX device, and an Accounting Stop packet when the user logs out.
radius
Configures RADIUS accounting.
tacacs+
Configures TACACS+ accounting.
none
Disables accounting.
Modes

Global configuration mode

Usage Guidelines

You can configure RADIUS, TACACS+, and none as accounting methods. If the configured primary accounting fails due to an error, the device tries the backup accounting methods in the order they are configured.

Note: If authorization is enabled, and the command requires authorization, then authorization is performed before accounting takes place. If authorization fails for the command, no accounting takes place.

The no form of the command disables accounting.

Examples

The following example configures the ICX device to perform RADIUS accounting for Telnet or SSH access. 

device(config)# aaa accounting exec default start-stop radius

The following example configures the ICX device to perform TACACS+ accounting for Telnet or SSH access and to specify the order of accounting preference. 

device(config)# aaa accounting exec default start-stop tacacs+ radius none
Parent topic: Commands A and B