aaa accounting system

Configures AAA accounting to record when system events occur on the device.
Syntax
aaa accounting system default start-stop radius [ tacacs+ ] [ none ]
no aaa accounting system default start-stop radius [ tacacs+ ] [ none ]
aaa accounting system default start-stop tacacs+ [ radius ] [ none ]
no aaa accounting system default start-stop tacacs+ [ radius ] [ none ]
aaa accounting system default start-stop none
no aaa accounting system default start-stop none
Command Default

AAA accounting is disabled.

Parameters
default
Configures the default named list.
start-stop
Configures to send an Accounting Start packet to be sent to the AAA accounting server when a system event occurs, and an Accounting Stop packet to be sent when the system event is completed.
radius
Configures RADIUS accounting.
tacacs+
Configures TACACS+ accounting.
none
Disables accounting.
Modes

Global configuration mode

Usage Guidelines

You can configure RADIUS, TACACS+, and None as accounting methods. If the configured primary accounting fails due to an error, the device tries the backup accounting methods in the order they are configured.

The no form of the command disables accounting.

Examples

The following example shows how to configure the ICX device to perform RADIUS accounting to record when a system event occurs. 

device(config)# aaa accounting system default start-stop radius

The following example shows how to configure the device to perform TACACS+ accounting to record when a system event occurs and to specify RADIUS and None as the backup accounting methods. 

device(config)# aaa accounting system default start-stop tacacs+ radius none
Parent topic: Commands A and B