atalk-proto

Configures the AppleTalk protocol-based VLAN.
Syntax
atalk-proto [ name string ]
no atalk-proto [ name string ]
Command Default

An AppleTalk protocol-based VLAN is not configured.

Parameters
name string
Specifies the name of the AppleTalk protocol you want to configure on a VLAN. The name can be up to 32 characters in length.
Modes

VLAN configuration mode

Usage Guidelines

The device sends AppleTalk broadcasts to all ports within the AppleTalk protocol-based VLAN.

The no form of the command disables the AppleTalk protocol-based VLAN.

Examples

The following example shows how to configure an AppleTalk protocol-based VLAN. 

device(config)# vlan 10 by port
device(config-vlan-10)# untagged ethernet 1/1/1 to 1/1/6 
added untagged port ethe 1/1/1 to 1/1/6 to port-vlan 30.
device(config-vlan-10)# atalk-proto name Atalk_Prot_VLAN
Parent topic: Commands A and B