If Your Network Uses SNMPv2

  1. Click the System Settings > SNMP tab.
  2. Under SNMPv2 Settings, configure the following settings:
    1. Community: Enter the SNMPv2 community string.
    2. Read: Select this check box to enable SNMP read access.
    3. Trap: Select this check box to send SNMP traps to the trap server on the network.
    Note: To add another SNMPv2 community string, click the icon, and then configure the community string and read and trap privileges.
  3. Click Save to save your changes.
  4. Under SNMP Trap, configure the following settings:
    1. SNMP Version: Select V2.
    2. Security Name: Enter the security name.
    3. Target Address: Enter the IP address of the SNMP trap receiver.
    4. Target Port: Enter the SNMP port number on the SNMP trap receiver.
  5. Click Save to save your changes.