Configuring ICX Switches
To allow
Unleashed Multi-Site Manager to monitor and manage ICX switches, you must enable software management in the switch
and register the device with
Unleashed Multi-Site Manager.
- Upload the Unleashed license as described in Uploading a License File.
- Enable
Unleashed Multi-Site Manager on the switch:
There are two ways to make an ICX switch aware of the Unleashed Multi-Site Manager's IP address - one is using DHCP option 43, and the other is using manual configuration through ICX commands.
- Manually configuring the
Unleashed Multi-Site Manager IP Address on a switch includes issues the
sz active-list <IP address>. Example:SSH@Freddy-ICX7150-48PF-Router>enable No password has been assigned yet... SSH@Freddy-ICX7150-48PF-Router#configure terminal SSH@Freddy-ICX7150-48PF-Router(config)#sz active-list 10.223.5.230
- Configuring DHCP to send
Unleashed Multi-Site Manager IP addresses to ICX switches using DHCP Option 43, includes the following steps as
shown in the example:
- Configure DHCP Option 43 on the DHCP server using the RKUS.scg-address to identify
the
Unleashed Multi-Site Manager IP addresses.
Unleashed Multi-Site Manager IP addresses are sent with 6 as the sub-option value. The switch ignores all other data in DHCP Option 43 if Unleashed Multi-Site Manager IP addresses are present. Example:
subnet 192.168.12.0 netmask 255.255.255.0 { range 192.168.12.100 192.168.12.199; option routers 192.168.12.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.12.255; option ntp-servers 192.168.11.22; class "Ruckus AP" { match if option vendor-class-identifier = "Ruckus CPE"; option vendor-class-identifier "Ruckus CPE"; default-lease-time 86400; vendor-option-space RKUS; option RKUS.scg-address "192.168.11.200"; } }
- Configure DHCP Option 43 on the DHCP server using the RKUS.scg-address to identify
the
Unleashed Multi-Site Manager IP addresses.
- Manually configuring the
Unleashed Multi-Site Manager IP Address on a switch includes issues the
- You can view the status of the
Unleashed Multi-Site Manager connection using the
show sz statuscommand.Example:SSH@Freddy-ICX7150-48PF-Router#show sz status ============ SZ Agent State Info =================== Config Status: None Operation Status: Enabled State: SZ SSH CONNECTED Prev State: SZ SSH CONNECTING Event: NONE Active List : 10.223.5.230 DHCP Option 43 : No DHCP Opt 43 List : None Passive List : None Merged List : 10.223.5.230 Merged Idx: 0 IP : 10.223.5.230 SZ IP Used : 10.223.5.230 SZ Query Status : Response Received SSH Tunnel Status - : Tunnel Status : Established CLI IP/Port : 10.223.5.230/40005 SNMP IP/Port : 10.223.5.230/30005 Syslog IP/Port : 127.0.0.1/6514 Timer Status : Not Running - You can use the
sz-disconnectcommand to disconnect the ICX switch from the current connection with Unleashed Multi-Site Manager, and initiate a new connection based on the currently available list of Unleashed Multi-Site Manager IP addresses. - Login to the
Unleashed Multi-Site Manager web interface and go to
Devices and to see the ICX switch within the Switch group.