Creating Device Policy Rules

Create rules for every device policy service.
  1. Click Security > Access Control and select Device Policy.
    This displays Summary and Profiles options.
  2. Select Profiles tab.
    This displays Device Policy Service page.
  3. In the Device Policy Service, click Create.
    This displays Create Device Policy Service.
  4. In Create Device Policy Service window, under Rules, click Create.
    This displays Create Device Policy Rule window.

    Creating a Device Policy Rule

  5. Enter the following policy rule details:
    1. Description: Enter a short description for this device policy.
    2. Action: Select Allow or Block. This is the action that the system will take if the client matches any of the attributes in the rule.
    3. Device Type: Select from any of the supported device types. This feature is also supported on 11 AX APs.
    4. OS Vendor: Select from any of the supported OS types.
    5. Rate Limiting: Enable the uplink and downlink rate limiting, and enter a rate limit value for each.
      Note: Rate limit supports maximum of 100 clients per WLAN per radio. After the threshold, the system displays client failure (203) error.
    6. VLAN : Enter the number of the VLAN in which to segment the client type. The value ranges from 1 through 4094; if no value is entered, this policy does not impact device VLAN assignment.
    7. Click OK.
Parent topic: Creating a Device Policy