Configuring Personal Identity Network for Switches
Ensure the following prerequisites are met before configuring PIN for switches:
- Jumbo mode needs to be enabled on all switches along the path between the Distribution Switch (DS) and RUCKUS Edge due to the use of a VxLAN tunnel for carrying PIN user traffic. The ICX hardware forwarding switch does not support IP fragmentation.
- For ICX Wired Clients, the Access Switch (AS) needs to be configured with a WebAuth VLAN specifying which ports should be included as untagged and tagged.
- WebAuth vlan needs to spread all the path from Access Switch to RUCKUS Edge and the RUCKUS Edge device needs to configure sub-interface for the vlan (a dhcp pool for WebAuth also needs to configure on the RUCKUS Edge DHCP server).
- The WebAuth VLAN requires a VE (Virtual Ethernet) interface with a proper IP address to activate the WebAuth process on the Access Switch.
- A static route needs to be configured on RUCKUS Edge to route traffic to the Distribution Switch (DS) loopback IP address from the RUCKUS Edge device.