Access/Core Separation

Virtual Extensible LAN (VXLAN) is used to create a virtual tunnel from the APs back to the RUCKUS Edge cluster. This tunnel allows the APs to behave as if they are directly connected to the data center, even though they are behind NAT and physically remote.

Feature Overview

The Access-Core Separation feature provides VXLAN-GPE tunneling to support separate core and access ports. The two-leg deployment clearly defines the role of each port:

  • Core port: Connects to the service provider or upstream network. The uplink port responsible for forwarding AP traffic to the upstream network after tunnel termination.
  • Access port: Connects to local LAN or client devices. The port where tunnels from RUCKUS Access Points (APs) terminate. It also serves as the default gateway for the APs.

The dual-port configuration enhances SD-LAN deployments by enabling VXLAN-GPE tunnels between Ruckus APs and Ruckus Edge devices.

Requirements

This feature has no special hardware or software requirements for feature ennoblement or usage.

Limitations

Here are the limitations associated with this feature:

  • Only one core-port and one access-port can be configured per Edge device.
  • All the Edge devices in the cluster must have both a core-port and an access-port configured to enable SD-LAN services.
  • This configuration is supported exclusively in Active-Active High Availability (HA) mode.

Considerations

This feature has no special considerations pertaining to feature ennoblement or usage.

Best Practices

This feature has no special recommendations for feature ennoblement or usage.

Prerequisites

This feature has no prerequisites to feature ennoblement or usage.