Activating and Editing the Eddystone Plugin
The RUCKUS
IoT Controller provides support for the Bluetooth Low Energy (BLE) Eddystone
plugin. The RUCKUS IoT Controller reads the packet from IoT
AP, and routes the packets to the BLE beacon vendor cloud services.
- From the main menu, click Admin.
- In the left navigation pane, click Plugins.
- In the Select a Plugin to Activate list, select the Eddystone plugin and click Activate.
- After the iBeacon plugin is activated, select either the HTTP or
MQTT
protocol option.
- For Aggregation Interval, set the time interval between the two packets.
- Enter the Key.
- Enter the API URL.
- Enter the Port number.
- Enter the API Endpoint.
- Enter the UUID Filter. The filter allows only the BLE ADV packets with the specified UUID to be passed on to the vendor application.
- Enable heartbeat. Enabling heartbeat allows the vendor application to receive the IoT AP status, such as online or offline.
- Status, displays the connection status.
- For MQTT Broker
IP, enter the IP address or hostname of the
broker.This is a mandatory field.
- For MQTT Broker
Port, enter the port number.This is a mandatory field.
- For MQTT Publish
Topic, topic where messages from this device/system will
be published.This is a mandatory field.
- For MQTT Username, enter the username for authenticating with the MQTT Broker.
- For MQTT Password, enter the password for authenticating with the MQTT Broker.
- For UUID
Filter, enter the required UUID filter.The filter allows only the BLE ADV packets with the specified UUID to be passed on to the vendor application.
- For Enable
heartbeat, toggle to enable periodic heartbeat messages,
useful for monitoring connection health.Enabling heartbeat allows the vendor application to receive the IoT AP status, such as online or offline.
- Click Apply.
- (Optional) To delete the Eddystone plugin, select it and click Delete.
- (Optional) To edit the configuration of the Eddystone plugin, select it and click Update.





