Change the Settings
HA configuration and Hot Upgrade can be
performed only when SSH is enabled.
- From the main menu, click Admin.
- In the left navigation pane, click Settings.
- Enable SSH and click
Apply.Note: If SSH is disabled, HA and Hot Upgrade feature will not be available.
- The Log Level Settings consists
of the below list items.
- DEBUG - Application developers use detailed tracing to debug problems in the IoT controller, logging messages at the DEBUG level on the logger.
- INFO - INFO logs informational messages that help end users and system administrators track the progress of the application. It logs a message at the INFO level on the logger. By default, INFO is selected.
- WARNING - Warning logs indicate that an unexpected event has occurred in the application, which may disrupt or delay other processes. They log a message at the WARNING level on the logger.
- ERROR - Error logs capture events of significant importance that prevent normal program execution, but the application might still continue running. They log a message at the ERROR level on the logger.
- Critical - Indicates a severe issue that may cause system failure, service disruption, or data loss.
- The BLE Radio Scan Settings
consists of the Scan
Mode and Discovery
Mode. By default, Passive and Discoverable modes are set. You can configure the Scan Mode to operate in
Active mode. In
the Active mode, gateways send scan requests and expect a SCAN_RSP packet in response
to
each broadcasted packet. Click Apply to accept the settings.For more detatils, refer to BLE Radio Scan Settings.
- The Internal Docker Network: Allows you to configure the internal network settings for containerized services running within the RUCKUS IoT Controller environment.
