Enabling Support for Tagged LLDP packets

By default, RUCKUS devices do not accept tagged LLDP packets from other vendor devices. To enable support, use the lldp tagged-packets process command in global configuration mode.

When enabled, the device accepts incoming LLDP tagged packets if the VLAN tag matches any of the following configurations:

  • A configured VLAN on the port
  • The default VLAN for a tagged port
  • The configured untagged VLAN for a dual-mode port

  1. Enter the configure terminal command to access global configuration mode. 
    device# configure terminal
  2. Enter the lldp tagged-packets process to enable support for tagged LLDP packets. 
    device(config)#lldp tagged-packets process

The following task enables the support for tagged LLDP packets 

device# configure terminal
device(config)#lldp tagged-packets process
Parent topic: LLDP Configuration