Disabling SNMP Traps
RUCKUS devices come with SNMP trap generation enabled by default for all traps. You can selectively disable one or more of the traps.
Note: By default, all SNMP traps are enabled at system startup.
SNMP Layer 2 Traps
The following traps are generated on devices running Layer 2 software:
SNMP Layer 3 Traps
The following traps are generated on devices running Layer 3 software:
- SNMP authentication key
- Power supply failure
- Fan failure
- Cold start
- Link up
- Link down
- Bridge new root
- Bridge topology change
- Locked address violation
- BGP4
- OSPF
- VRRP
- VRRP-E
To stop link down occurrences from being reported, enter the following command.
device(config)# no snmp-server enable traps link-down