ICX 7550 Module 2 Stacking and Uplink Options

ICX 7550 Module 2 supports stacking by default. Port speed is automatically detected based on the optics inserted.

You can convert a standalone ICX 7550 for 100-Gbps data uplink (ports may then operate at 100 Gbps or 40 Gbps depending on module and optics). Refer to Converting from Stacking to Data Uplink on ICX 7550 Module 2.

You can convert a standalone ICX 7550 for 100-Gbps data uplink (ports may then operate at 100-Gbps or 40-Gbps depending on module and optics). Refer to the "Converting from Stacking to Data Uplink on ICX 7550 Module 2" section of the RUCKUS FastIron Stacking Configuration Guide.

Note: Port 1/2/1 is invalid in 100-Gbps uplink mode on ICX 7550-24F or ICX 7550-24ZP devices.

The following table summarizes available Module 2 stacking and uplink options for each ICX 7550 model.

ICX 7550 Module 2 Stacking and Uplink Options

ICX 7550 Model	Stacking		Uplink
ICX 7550 Model	40-Gbps	100-Gbps	40-Gbps	100-Gbps
ICX 7550-24 ICX 7550-24P ICX 7550-48 ICX 7550-48P	2 X 40-Gbps	N/A	2 X 40-Gbps	N/A
ICX 7550-24F ICX 7550-24ZP	2 X 40-Gbps	2 X 100-Gbps	2 X 40-Gbps	1 X 100-Gbps
ICX 7550-48F ICX 7550-48ZP	2 X 40-Gbps	2 X 100-Gbps	2 X 40-Gbps	2 X 100-Gbps

Stacking by Device

ICX 7550 Module 2 Stacking and Uplink Options

ICX 7550 Module 2 Stacking and Uplink Options