Displaying VRRPv2 Information

Various show commands can be used to display statistical and summary information about VRRP and VRRP-E configurations.

Before displaying VRRP information, VRRPv2 must be configured and enabled in your VRRP or VRRP-E network to generate traffic.

Use one or more of the following commands to display VRRPv2 information. The commands do not have to be entered in this order.
  1. Enter the show ip vrrp command with the vrid option and a virtual router ID (VRID) to display IPv4 VRRP configuration information about VRID 1. 
    device# show ip vrrp vrid 1

Interface 1/1/1
----------------
auth-type no authentication
VRID 1 (index 1)
interface 1/1/1
state master
administrative-status enabled
version v2
mode owner
virtual mac aaaa.bbbb.cccc (configured)
priority 255
current priority 255
track-priority 2
hello-interval 1 sec
backup hello-interval 6
  2. Enter the show ip vrrp brief command. 
    device(config)# show ip vrrp brief

Total number of VRRP routers defined: 2
Flags Codes - P:Preempt 2:V2 3:V3 S:Short-Path-Fwd
Inte- VRID  Current  Flags    State   Master IP Backup IP  Virtual IP
rface       Priority                  Address   Address    Address
----------------------------------------------------------------------
1/1/1 10    255      P2-      Master  Local     Unknown    10.30.30.2
1/1/3 13    100      P2-      Master  Local     Unknown    10.13.13.3
    This example displays summary information about VRRP sessions.
  3. Enter the show ip vrrp-extended statistics command for Ethernet interface 1/1/5. 
    device# show ip vrrp-extended statistics ethernet 1/1/5

Interface 1/1/5
----------------
VRID 2
- number of transitions to backup state = 1
- number of transitions to master state = 1
- total number of vrrp-extended packets received = 0
  . received backup advertisements = 0
  . received packets with zero priority = 0
  . received packets with invalid type = 0
  . received packets with invalid authentication type = 0
  . received packets with authentication type mismatch = 0
  . received packets with authentication failures = 0
  . received packets dropped by owner = 0
  . received packets with ttl errors = 0
  . received packets with ipv6 address mismatch = 0
  . received packets with advertisement interval mismatch = 0
  . received packets with invalid length = 0
- total number of vrrp-extended packets sent = 2004
  . sent backup advertisements = 0
  . sent packets with zero priority = 0
- received neighbor solicitation packets dropped = 0
- received proxy neighbor solicitation packets dropped = 0
- received ip packets dropped = 0
Parent topic: VRRPv2