Displaying Information on Stack Connections
You can check the data connections between stack units with the
show stack connection command.
When the
show stack connection command output includes the message
*** error: one-way, this may indicate a stack port to non-stack-port connection. When this occurs, the
side of the connection that is incorrectly configured as a stack port must be converted
to a data port.
In the following example, the
show stack connection command output indicates that CPU-to-CPU connections are working properly between
all members of the stack.
ICX7850-48FS Router# show stack connection
Probing the topology. Please wait ...
active standby
+---+ +---+ +---+ +---+
-2/5| 1 |2/1==2/5| 2 |2/1--2/1| 3 |2/5--2/1| 4 |2/5-
| +---+ +---+ +---+ +---+ |
| |
|--------------------------------------------------|
probe results: 4 links, P0/1: stk-port dir 0/1, T0/1: stack-trunk dir 0/1
Link 1: u1 -- u2, num=4
1: 1/2/1 (T0) <---> 2/2/5 (T1)
2: 1/2/2 (T0) <---> 2/2/6 (T1)
3: 1/2/3 (T0) <---> 2/2/7 (T1)
4: 1/2/4 (T0) <---> 2/2/8 (T1)
Link 2: u1 -- u4, num=1
1: 1/2/5 (P1) <---> 4/2/5 (P1)
Link 3: u2 -- u3, num=1
1: 2/2/1 (P0) <---> 3/2/1 (P0)
Link 4: u3 -- u4, num=1
1: 3/2/5 (P1) <---> 4/2/1 (P0)
CPU to CPU packets are fine between 4 units.