Displaying Hitless Stacking Status

The show stack command indicates whether hitless stacking is enabled. The following example shows that hitless stacking is disabled.

ICX7850-48FS Router# show stack
T=1d23h31m36.6: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment
1  S ICX7850-48FS  active  d4c1.9e18.83e1 128 local   Ready
2  D ICX7850-48F   standby d4c1.9e17.7daf   0 remote  Ready
3  D ICX7850-48F   member  d4c1.9e17.8907   0 remote  Ready
4  D ICX7850-48F   member  d4c1.9e17.7e07   0 remote  Ready

    active       standby
     +---+        +---+        +---+        +---+
 -2/5| 1 |2/1==2/5| 2 |2/1--2/1| 3 |2/5--2/1| 4 |2/5-
 |   +---+        +---+        +---+        +---+   |
 |                                                  |
 |--------------------------------------------------|
Standby u2 - No hitless failover. Reason: hitless-failover not configured