Displaying the Boot Preference

You can view information about the boot sequence in the startup configuration and running configuration files.
Use the following commands to display the boot sequence in the startup configuration and running configuration files. The commands do not need to be entered in the specified order. Using these commands is optional and they can be entered in any order. For more information on these commands, refer to the RUCKUS FastIron Command Reference.
  1. Enter the show boot-preference command to display the boot sequence in the startup configuration and running configuration files.
    device> show boot-preference

Boot system preference(Configured):
        Boot system flash secondary
Boot system preference(Default):
        Boot system flash primary
        Boot system flash secondary
    Information about the default boot sequence preference is displayed.
  2. Enter the show running-config command to view detailed information about the configuration. 
    ICX7650-48P Router# show running-config
Current configuration:
!
ver 09.0.10a_b175T233
!
stack unit 1
  module 1 icx7650-48p-port-management-module
  module 3 icx7650-100g-2port-200g-module
  stack-port ethernet 1/3/1
  stack-port ethernet 1/3/2
!
global-stp
!
vlan 1 name DEFAULT-VLAN by port
 spanning-tree
!
ip route 0.0.0.0/0 10.176.192.1
!
ip tftp blocksize 8192
!
interface management 1
 ip address 10.176.197.64 255.255.240.0
 no ip dhcp-client enable
!
interface ethernet 1/1/4
 arp inspection trust
!
overlay-gateway gate1
 type layer2-extension
 site site1
 !
no lldp run
!
username janedoe password .....
!
aaa authentication login default local
!
aaa authentication web-server default local
!
aaa authentication snmp-server default local
!
end
Parent topic: Operations, Administration, and Maintenance