Configuring RSPAN

RSPAN enables remote monitoring of multiple devices across a network. The following configuration demonstrates an RSPAN for both ingress and egress traffic.

On the source device, enter the configure terminal command to access global configuration mode.
```
device1# configure terminal
```

Enter the rspan-vlan command, specifying a VLAN ID, to define an RSPAN VLAN on the source device.
```
device1(config)# rspan-vlan 4000
```

Enter the tagged ethernet command, specifying an interface, to add a member port.
```
device1(config-rspan-vlan-4000)# tagged ethernet 1/1/2 
```

Enter the rspan destination command, specifying an interface, to configure the RSPAN destination port.
```
device1(config-rspan-vlan-4000)# rspan destination ethernet 1/1/2
```

Enter the rspan source command with the monitor-both keyword, specifying an interface, to configure the RSPAN source port and specify that both ingress and egress traffic is monitored.
```
device1(config-rspan-vlan-4000)# rspan source monitor-both ethernet 1/1/1
```

On the intermediate device, enter the configure terminal command to access global configuration mode.
```
device2# configure terminal
```

Enter the rspan-vlan command, specifying a VLAN ID, to define an RSPAN VLAN on the intermediate device.
```
device2(config)# rspan-vlan 4000
```

Enter the tagged ethernet command with the ethernet keyword, specifying an interface, to add member ports.
```
device2(config-rspan-vlan-4000)# tagged ethernet 1/1/1 ethernet 1/1/2 
```

On the destination device, enter the configure terminal command to access global configuration mode.
```
device3# configure terminal
```

Enter the rspan-vlan command, specifying a VLAN ID, to define an RSPAN VLAN on the destination device.
```
device3(config)# rspan-vlan 4000
```

Enter the tagged ethernet command with the ethernet keyword, specifying an interface, to add member ports.
```
device3(config-rspan-vlan-4000)# tagged ethernet 1/1/1 ethernet 1/1/2 
```

Enter the rspan destination command, specifying an interface, to specify the RSPAN destination port.
```
device3(config-rspan-vlan-4000)# rspan destination ethernet 1/1/2
```

The following example configures an RSPAN for ingress and egress traffic.

Source device:

device1# configure terminal
device1(config)# rspan-vlan 4000
device1(config-rspan-vlan-4000)# tagged ethernet 1/1/2 
device1(config-rspan-vlan-4000)# rspan destination ethernet 1/1/2
device1(config-rspan-vlan-4000)# rspan source monitor-both ethernet 1/1/1

Intermediate device:

device2# configure terminal
device2(config)# rspan-vlan 4000
device2(config-rspan-vlan-4000)# tagged ethernet 1/1/1 ethernet 1/1/2

Destination device:

device3# configure terminal
device3(config)# rspan-vlan 4000
device3(config-rspan-vlan-4000)# tagged ethernet 1/1/1 ethernet 1/1/2 
device3(config-rspan-vlan-4000)# rspan destination ethernet 1/1/2

RUCKUS FastIron Monitoring Configuration Guide, 09.0.10 53-1005725-17

Configuring RSPAN