Software Mandatory Upgrade Steps from a Pre-08.0.90 Non-UFI Version to a 08.0.95 UFI Version

Upgrading from a Pre-08.0.90 non-UFI version to a FastIron 08.0.95 UFI version is a two-step upgrade process. For example, if you want to upgrade a stacking unit or a standalone device from FastIron 08.0.70 to FastIron 08.0.95, complete the following steps.

1. Download the 08.0.80f non-UFI using one of the transfer methods listed in File Transfer Method and Commands Required , and reboot the device with the 08.0.80f image using the boot system flash primary command. The system uses the 08.0.80f image. Save the running configuration to startup configuration using the write memory command.
   Note: The above step is mandatory as it migrates the configured Access Control list (ACL) configurations without sequence numbers to the new ACL format. The system will otherwise lose the previously configured ACL configuration without sequence numbers while upgrading from a pre-08.0.90 non-UFI version to a UFI version.
2. Copy the 08.0.95 UFI to the primary flash partition using the same method, and reboot the device again.
   Note: The show version command might display boot code mismatch message after performing the above upgrade step.
   Re-copy the 08.0.95 UFI to the secondary flash partition to avoid boot image mismatch.

1a) device# copy tftp flash 10.177.16.144 SPR08080f.bin primary
1b) device# copy tftp flash 10.177.16.144 spz10114.bin bootrom
and
2a) device# copy tftp flash 10.177.16.144 SPR08095ufi.bin primary
2b) device# copy tftp flash 10.177.16.144 SPR08095ufi.bin secondary

or

1) device# copy tftp system-manifest 10.176.220.51 FI08080f_Manifest.txt all-images-primary
2a) device# copy tftp system-manifest 10.176.220.51 FI08095_Manifest.txt primary
2b) device# copy tftp system-manifest 10.176.220.51 FI08095_Manifest.txt secondary

1a) device# copy scp flash 10.176.132.13 SPR08080f.bin primary
1b) device# copy scp flash 10.176.132.13 spz10114.bin bootrom

2a) device# copy scp flash 10.176.132.13 SPR08095ufi.bin primary
2b) device# copy scp flash 10.176.132.13 SPR08095ufi.bin secondary

1a) device# copy https flash 10.176.132.132 SPR08080f.bin primary
1b) device# copy https flash 10.176.132.132 spz10114.bin bootrom

2a) device# copy https flash 10.176.132.132 SPR08095ufi.bin primary
2b) device# copy https flash 10.176.132.132 SPR08095ufi.bin secondary

1a) device# copy disk0 flash SPR08080f.bin primary
1b) device# copy disk0 flash spz10114.bin bootrom

2a) device# copy disk0 flash SPR08095ufi.bin primary
2b) device# copy disk0 flash SPR08095ufi.bin secondary