RUCKUS FastIron Software Upgrade Guide, 08.0.95
- 1 CommScope Legal Statements
- Preface Ruckus
- About This Document
- 5 Software Upgrade and Downgrade
- 5.1 Software Upgrade Procedure Overview
- 5.2 General Considerations for FastIron 08.0.95h or Later
- 5.3 Initial Steps
- 5.4 Upgrade Considerations for ACLs
- 5.5 Upgrade Process
- 5.5.1 Software Mandatory Upgrade Steps from a Pre-08.0.90 Non-UFI Version to a 08.0.95 UFI
Version
- 5.5.1.1 Loading the Flash Code using TFTP
- 5.5.1.2 Loading the Flash Code using Manifest Method
- 5.5.1.3 Recovery procedure
- 5.5.1.4 Loading the Flash Code Using SCP
- 5.5.1.5 Loading the Flash Code Using HTTPS
- 5.5.1.6 Loading the Flash Code Using USB
- 5.5.2 Software Upgrade from a UFI to FastIron 08.0.95 UFI release
- 5.5.3 Upgrade Considerations for the ICX7150-C08P
- 5.5.1 Software Mandatory Upgrade Steps from a Pre-08.0.90 Non-UFI Version to a 08.0.95 UFI
Version
- 5.6 Software Downgrade from a UFI to a Non-UFI Version
- 5.7 Reverting to the Old Image
- 5.8 Image download using USB
- 5.9 Software Recovery
- 5.9.1 Recovering Software
- 5.10 Deprecated or Removed Features and Commands
- 5.11 Upgrade and Downgrade Limitations
- 5.12 General Upgrade and Downgrade Considerations for Stacks
- In-service Software Upgrade
- 6 In-Service Software Upgrade
- 6.1 What Is an In-service Software Upgrade?
- 6.2 ISSU Limitations and Considerations
- 6.3 Recommended Stack Topology for ISSU
- 6.4 How ISSU Works When Upgrading Stack Units
- 6.5 Upgrading a Stack with ISSU
- 6.6 Recommended Topology for Campus Fabric (SPX) ISSU
- 6.7 How ISSU Works When Upgrading a Campus Fabric (SPX) System
- 6.8 Upgrading a Campus Fabric (SPX) System with ISSU
- 6.9 ISSU Errors
- 6.10 Manual Error Recovery
- 6 In-Service Software Upgrade