Determining the Current Flash and Boot Image Versions

To determine the current boot and flash image versions installed on a device, enter the show version command at any level of the CLI.

device# show version
  Copyright (c) 1996-2016 Brocade Communications Systems, Inc. All rights reserved.
    UNIT 3: compiled on Jan 21 2019 at 23:28:08 labeled as SPR08030
      (31768772 bytes) from Primary SPR08030.bin
        SW: Version 08.0.30T213 
    UNIT 1: compiled on Jan 21 2019 at 23:28:08 labeled as SPR08030
      (31768772 bytes) from Primary SPR08030.bin
        SW: Version 08.0.30T213 
    UNIT 4: compiled on Jan 21 2019 at 23:28:08 labeled as SPR08030
      (31768772 bytes) from Primary SPR08030.bin
        SW: Version 08.0.30T213 
      Compressed Boot-Monitor Image size = 786944, Version:10.1.06T215 (spz10106)
  HW: Stackable ICX7450-48
  Internal USB: Serial #: 9900314061200173
      Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-48F 48-port Management Module
      Serial  #:CYS3333K006
      License: ICX7450_L3_SOFT_PACKAGE   (LID: eauIIIImFFL)
      License Compliance: ICX7450-PREM-LIC-SW is Compliant
.
.
The system : started=warm start   reloaded=by "reload"
My stack unit ID = 3, bootup role = active