SPX interactive-setup

SPX interactive-setup is an interactive tool that guides the user through Campus Fabric configuration. It can be used to configure a broader range of topologies than the zero-touch utility.
Note: For more information on the topologies that the SPX interactive-setup utility handles, refer to Zero-touch and interactive-setup topology requirements.

The SPX interactive-setup utility handles a variety of SPX topologies by prompting the user to make necessary configuration selections to render the topology valid. You can use interactive-setup to configure a new Campus Fabric domain or to add units to an existing domain. The utility can also help you change PE IDs or convert an existing stack of ICX 7150, ICX 7250, or ICX 7450 units to a PE chain or ring.

In this section:

  1. Changing PE IDs with SPX interactive-setup
    SPX interactive-setup makes changing PE IDs simpler.
  2. Configuring SPX to move PE units without changing IDs
    You can move PE units to a new port and retain their current IDs with spx allow-pe-movement configured.
  3. Converting a stack to a PE chain or ring
  4. Converting a PE chain or chains to a ring
  5. Downloading images to new units before converting them to PEs with SPX interactive-setup or zero-touch provisioning
Parent topic: Campus Fabric Configuration Overview and Interactive Configuration