SPX information in show configuration command output
In regular switch or router mode, the show configuration command shows the saved startup configuration. In PE or Provisional-PE mode, the
show configuration command shows the configuration in the PE startup file for the unit.
Note: To view the startup configuration that the unit would have in regular mode (as a switch
or router), use the
show startup-config command instead.
The following example shows the configuration for a provisional PE that has been enabled
with the
spx pe-enable
command.
[Provisional-PE]ICX7450-48F Router# show configuration Configuration in PE startup file: ! ver 08.0.40b1T213 ! spx pe-enable spx unit 1 module 1 icx7450-48f-sf-port-management-module module 2 icx7400-xgf-4port-40g-module module 4 icx7400-qsfp-1port-40g-module spx-lag 1/2/1 to 1/2/2 spx-port 1/2/4