show wired- client

Displays the wired client sessions associated with the current AP.
Syntax
show wired-clientwired-client-mac
Parameters
wired-client-mac
Wired client MAC address.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example displays the sessions associated with the current AP for the wired client with the specified MAC address. 

device# show wired-client

  <wired-client-mac>     Wired Client MAC address
 
sz300-1# show wired-client D4:BE:D9:48:89:31
   General Options
   ----------------------------------------------------------------
   MAC Address                     : D4:BE:D9:48:89:31
   Auth Status                     : AUTHORIZED
   User                            : guest3
   VLAN                            : 1
   IP Address                      : 192.168.43.79
   IPv6 Address                    : fdff:a040::ce4a
   AP MAC                          : C8:03:F5:2C:80:E0
   LAN                             : 1
   Connected Since                 : 2021-03-30 09:02:48 GMT
   Packets from Client             : 99
   Bytes from Client               : 9.1KB
   Packets to Client               : 68
   Bytes to Client                 : 11KB
History
Release version Command history
3.5.1 This command was introduced.
Parent topic: Show Commands