show nat

Displays the NAT server configuration settings.
Syntax
show nat { stats | summary public-ip | filter | }
Parameters
stats
Displays the NAT service status.
summary
Displays NAT server information.
public-ip
Displays NAT server information.
filter
Displays NAT server filter information.
Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone Data Plane controllers only.

Examples

The following example shows output from the show nat status command. 

device# config
device(config)# nat 
device((config-nat)# # show stats
>> NAT stats: write stats into file '/etc/dp_config/nat_stats.txt'
upstream rate (from private):  0 kbps
downstream rate (from public): 0 kbps
port-mapping assignment rate:  0 /sec
public-vlan: 0
Pools(0) assigned port count: ('active' ones only)
Parent topic: Show Commands