show md-stats

Displays the MD-Statistics captured on this controller.
Syntax
show md-stats{ap-macmac-address|node-idnode-id|peer-scg-macmac-address|remote|scg|scg-app-name}
Parameters
ap-macmac-address
Display the statistics for the connected AP at the controller.
node-idnode-id
Displays the statistics for node IDs stats; Valid value: actual node id + 1
peer-scg-macmac-address
Display the statistics for other SCG-MD connections at the controller.
remote
Display the statistics from remote AP/DP; Valid value: ap / dp .
mac
Provide MAC of AP/DP
app-name
Provide app-name from AP/DP; Valid value: ap_md / dp_md
scg
Display the local MD shared memory statistics.
scg-app-name
Displays the local application statistics; application names must be one of the following (scg_md/scg_sessmgr/md_proxy/scg_hip/scg_cnr/scg_communicator/scg_sciagent/scg_web/scg_eventreader/scg_nbi/scg_publicapi/scg_memproxy/scg_observer/scg_logmgr/logclient/scg_idm/scg_ccd/scg_push/scg_greyhound/scg_snmp/scg_cached)
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example shows partial output from the show md-stats scg command. 

device# show md-stats scg

============================================================================
MD Stats collected From    : [Apr14 2020 09:32:29] Till: [Apr14 2020 10:02:24]
MD -> App Success          : 371
MD -> App Failure          : 0
App -> MD Success          : 371
App -> MD Failure          : 0
AP MD connected            : 0
AP MD disconnected         : 0
DP MD connected            : 0
DP MD disconnected         : 0
Other MD connected         : 0
Other MD disconnected      : 0
PartialWriteTcpDiscCount   : 0
MPS Achieved               : 0
RAC Msg from ssh(Rx)       : 0
RAC Msg to MD(Rx)          : 0
MD to ssh Rac Msg(Tx)      : 0
MD to RAC, Rac msg(Tx)     : 0
============================================================================
MD Stats collected From    : [Apr14 2020 10:02:29] Till: [Apr14 2020 10:32:24]
MD -> App Success          : 372
MD -> App Failure          : 0
App -> MD Success          : 372
App -> MD Failure          : 0
AP MD connected            : 0
AP MD disconnected         : 0
DP MD connected            : 0
DP MD disconnected         : 0
Other MD connected         : 0
Other MD disconnected      : 0
PartialWriteTcpDiscCount   : 0
MPS Achieved               : 0
RAC Msg from ssh(Rx)       : 0
RAC Msg to MD(Rx)          : 0
MD to ssh Rac Msg(Tx)      : 0
MD to RAC, Rac msg(Tx)     : 0
============================================================================
.
.
.
Parent topic: Show Commands