show dhcp binding

Displays the DHCP binding or profile for a vSZ-D controller.
Syntax
show dhcp binding{ue-mac-address|pool_namepool-name}
Parameters
binding
Displays DHCP binding information.
ue-mac-address
Display the DHCP binding information for the device specified by the MAC address.
pool_namepool-name
Display the DHCP binding information for the specified device pool.
Modes

Privileged EXEC mode

Usage Guidelines

Run the show dhcp command to display DHCP information configured on the controller for troubleshooting purposes.

This command is supported on the SmartZone Data Plane controllers only.

Examples

The following example displays DHCP binding information for a single device specified by its MAC address. 

device# show dhcp binding pool_name DHCP-POOL-01

>> Dynamic IPs: shown=0 (detected: expired=0, actv=0
     Fixed IPs: shown=0 (detected: expired=0, actv=0)
Parent topic: Show Commands